|
Are you searching for information about invisible dog fences? Visit our site for complete information about how these devices can work for your dog. You can also purchase your invisible dog fence from us today! - Check here
|
|
|
 This is somewhat breed dependent, but most breeds should be 16-20 weeks of age. During training an owner observes their dog sitting in the correction zone. The owner has touched the probes and has determined the collar invisiblefenceprice is working. The owner can invisiblefenceprice see the dog''s skin flinch, so he is sure the dog is receiving the correction. What should the owner do to prevent this from happening Retrain the dog by putting it on a long leash. As soon as the dog is observed entering the corrective zone it should be pulled out and redirected to the "sit" and "stay" command. Once a dog is trained to the system what is the best way to take the dog out of the boundary? Create what is called an "invisible gate" and take the dog out only through this gate. Once a dog is trained to the invisiblefenceprice system how does the owner create the "invisible gate" concept? Place a long leash on the dog. Turn the system off. Remove the dog''s collar. Put the dog on the "sit" and "stay" command near the area that will become the "gate". Owner walks out of yard and asks dog to "come". Our Remote Trainers allow you to control your dog''s behavior from a distance of up to 2 miles! Remote Training Collars consist of two main components: a receiver that comes attached to an all-weather collar and a hand-held remote control transmitter that sends signals to the receiver. They are designed to assist in the training and the behavior modification of your dog. Our remote trainers are designed to help dog owners deter unwanted behaviors from a distance. They can be used to control any misbehavior that you see your dog exhibiting by using the transmitter to send a clear signal to the receiver worn by your dog. After a few corrections your pet will begin to avoid the misbehavior. Eventually the same effect can be achieved once your pet associates the tone with the correction, by using the negative tone only. Almost all behaviors exhibited by your dog are "normal" dog behaviors. How do I prevent one dog from chewing on the collar of another dog? If you see one dog chewing on the other dog''s collar - pull him off and redirect him to "sit" and "stay". Also, a daily spraying of Lysol on the dog''s collar will help repel the other dog. Technical Questions asked by our customers How many feet of wire can the deluxe system handle? The Deluxe system can handle up to 4600 feet of wire. How do I keep the signal out of the back yard? On your layout of the wire you will need to do a double loop in the front yard, this is where you run a wire twice in the front yard, this way there is no wire in the back. How do I twist one invisiblefenceprice wire together to cancel the signal In order to cancel the signal you MUST close your continuous invisiblefenceprice loop, then twist the two ends of the wire together. It must be twisted 8 to 10 twists per foot. This is best achieved by using a drill or cordless screwdriver. Can I use a different size other than the 18-gauge wire for the boundary? Yes, as long as you use a solid or stranded wire that is an 18, 16, or 14 gauge. Are you searching for information about invisible dog fences? Visit our site for complete information about how these devices can work for your dog. You can also purchase your invisible dog fence from us today!
|